|
42032M9V Centrifugal Extractor by Milnor |
|
|
 Features
- Microprocessor controls link to washer and dryer
- Bearing housing supported 360 degree by "ring of steel design"
- Single-motor inverter drive
- Automatic loading and unloading
- A variety of configurations available
- Forty-character, alphanumeric display
- Four programmable extract speeds
- Large disc brake shortens turnaround time
- Suspension system isolates vibration
- Patented optional inflatable ribs can break cotton goods from basket quickly
Benefits
- Faster, higher output with a superior finish
Low moisture retention, without setting wrinkles, allows these uniforms to go directly to a steam finishing tunnel.
- Saves time, labor and fuel
Reduces mat post-processing. Low moisture retention is achieved with either cotton or synthetic mats, even up to 4' x 10'.
- Microprocessor is flexible, easy to use
Microprocessor control links to washer and dryer controls for a completely automated system.
- Maximum moisture removal reduces drying times
Milnor's centrifugal extractor has cylinder speeds up to 1000 Gs for excellent moisture removal. Pre-extract load distribution speed minimizes out-of-balance conditions.
- Faster repairs mean less downtime
Superior product support through local, highly-skilled dealers.
Specifications
| Dimensions and Weights |
| Approx. Net Weight |
12,000.0 lb. |
5,443 kg |
| Overall Width |
113.3 in. |
2,878 mm |
| Overall Depth |
126.6 in. |
3,216 mm |
| Overall Height |
128.8 in. |
3,272 mm |
| Run Height |
96.3 in. |
2,445 mm |
| Cylinder Size |
| Cylinder Diameter |
42.0 in. |
1,067 mm |
| Cylinder Depth |
32.0 in. |
813 mm |
| Cylinder Volume |
25.7 cu. Ft. |
728 L |
| Speeds and Acceleration |
| Max. Extract Speed |
900 RPM |
|
| Motors |
| Single Motor Drive |
20 HP |
14.9 kW |
| Press Specifications |
| Hydraulic pump motor |
10 HP |
7.5 kW |
|
Products 
