35 lb Capacity

Toll Free: 1-877-432-7286

MWR16E5 from right 14126 3 231x300
SPECIFICATIONS
Suspension Rigid
Cabinet Cabinet
Controller E-P One Touch®
Capacity 35 lb. (16 kg)
Width 29 in. (737 mm)
Depth 41.88 in. (1064 mm)
Height 42.94 in. (1091 mm)
Door Opening 12 in. (305 mm)
Shipping Weight 584 lb. (265 kg)
Cylinder Open Pocket
Cylinder Diameter 23 in. (584 mm)
Cylinder Depth 18 in. (457 mm)
Cylinder Volume 4.3 cu. ft. (122 L)
Wash Speed 43 rpm
Distribution Speed 92 rpm
Extraction Speed 525 rpm
Extraction G-Force 80 Gs
Extraction Group Low
Drive Motor 1.5 HP (1.12 kW)
Inlet Connection 0.75 in. (19 mm)
Drain Valve 2 in. (51 mm)
Markets OPL

Save Labor

The Milnor Model MWR16E5 provides multiple ways to save on your labor costs and improve employee efficiency, including:

E-P OneTouch® Microprocessor

This basic control features four pre-programmed wash formulas (based on soil type) that are clearly identified by graphics for easy selection and activated by simple push buttons. Operators can see the final step has been initiated when the indicator is illuminated, thus, increasing productivity through less downtime.

Process Times

Milnor's microprocessors and software are fast and reliable allowing for quick processing of programmed formulas. Faster process times mean less time processing linen.

Cylinder Volume

A larger cylinder volume than most competitive 20 lb. capacity washer-extractors provides greater productivity through enhanced mechanical action, thorough rinsing and improved extraction. The result is more linen washed per day, or fewer hours required to process the linen.


Save on Linen Replacement Costs

The second highest expense of a laundry is the cost of linen. The Milnor MWR16E5 can help you to extend linen life:

Safe Chemical Injection System

Chemicals are injected in the rear of the machine (unlike certain brands where chemicals are injected near the front of the machine at eye-level). Chemicals are diluted and flushed into the sump of the washer-extractor so that raw chemical does not come in direct contact with the linen or the stainless steel.


Save Energy

A Milnor MWR16E5 can help to reduce your utility bills with its:

Frequency Drive System

A simple single-motor inverter drive reaches maximum extraction speed more gradually and efficiently, reducing peak electricity amperage draw compared to multi-speed motor machines.


Save Water

A Milnor MWR16E5 can reduce fresh water consumption with its:

Three Simple Fast Fill Water Valves

Simple hot and cold water inlets are used to quickly fill the washer without fill level overshoot. A third water inlet is used to thoroughly dilute chemicals so that raw chemical does not directly contact and damage linens.

Proper Cylinder Design

Perforation pattern and perforated ribs allow for rapid exchange of water with the goods, efficiently utilizing the water.


Save Money (Total Cost of Ownership)

There are many features designed into a MWR16E5 washer-extractor to reduce your total cost of ownership - saving you money for years AFTER your initial investment.

Value-Priced

Low initial capital ownership coupled with proven Milnor engineering makes the MWR16E5 an excellent choice for your laundry.

Long Machine Life

Milnor machines typically last longer because of their legendary ruggedness, thoughtful design and dependable quality.

Support Worldwide

Milnor laundry machinery is sold worldwide by the most highly regarded dealer network. Dealers not only provide complete equipment packages, but also can help with planning and installation and offer technical support.

Bearings

Tapered roller bearings have a large contact area - spreading force and contributing to long life. Front and rear bearings are fixed in the same housing, preventing damaging misalignment. And, a pressed-on basket means it does not need to be replaced when a bearing change becomes necessary. Milnor's bearing design is long proven while other companies keep experimenting.

L10 Life

Every Milnor design model is tested for a minimum of 1,000 consecutive hours in a high-extract, out-of-balance state - ensuring your machine is tough and will stand up to years of use.

Authorized Distributor for:

milnor_ref.png chicago_ref.png adc_ref.png energenics_ref.png

Nicholson Mechanical Ltd.


#6 - 2076 Townline Road
Abbotsford, BC   V2T 6E5
Toll Free: (877) 432-7286
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.

About Nicholson Mechanical


Nicholson is a leading supplier of commercial laundry equipment, based in Vancouver, BC. We offer a full line of equipment from the industries top manufacturers such as Pellerin Milnor, Chicago Dryer and American Dryer.